Hioki 3554-52 Battery Tester

Hioki portable battery testers support the maintenance of UPS and storage batteries, which are critical to the life support of all businesses. The Hioki 3554-52 sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.

• Battery measurement can be performed while the battery is connected to its host device without taking it offline.
• Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554.
• Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1).
• Noise reduction technology improves noise resistance.
• Screen and audio (*2) guidance simplifies measurement.
• Measurement data is linked to site information and saved, reducing administrative hours.
• Easily transfer measurement data to your smartphone or tablet using our free app, GENNECT Cross (*3), or an Excel® file. (Wireless Adapter Z3210 is necessary).
• The new protector delivers better ergonomic hold and durability in the field.

Resistance measurement range:

• 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
• Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
• Testing source frequency: 1 kHz ±30 Hz
• With function for avoiding noise frequency enabled: 1 kHz ±80 Hz
• Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range)
• Open terminal Voltage: 5 V peak

Voltage measurement range:

• ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt

Temperature measurement accuracy:

• Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C (±1.8°F)
  • When using the Clip Type Lead with Temperature Sensor 9460.
  • When using the Temperature Probe 9451, add ±0.5°C (±0.9°F) (cable length: 1.5 m [59.1″]).
  • When using the Temperature Probe 9451S, add ±0.5°C (±0.9°F) (cable length: 0.1 m [3.94″]).
• BT3554-50 standalone accuracy with simulated input: ±0.5°C (±0.9°F)
• Absolute max. input voltage: 60 V DC max. (No AC input)
• Measurement time: 100 ms
• Response time: Approx. 1.6 sec.

Comparator:

• Compares measured values with set threshold values to make judgments and reports them to the user.
• Judgement notification method: Results are displayed as shown below (segment) and beeping tones sound
• When the Voltage value (high): Resistance value (low)= PASS, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• When the Voltage value (low): Resistance value (low)= WARNING, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• If the judgement result is WARNING or FAIL, the audio tone is accompanied by a red backlight.
• User-selectable voltage judgement method: ABS (absolute value judgement), POL (polarity judgement )
• Savable settings: 200 tables

Memory functionality:

• Operation: Save, load and delete measurement data; save and delete profile information
• Number of data sets: 6000
• Memory architecture: 500 data sets per unit (12 units)
• Saved data: Saved measurement data is linked to profile information.
• Measurement data: Data can be saved, loaded, and deleted by operating the instrument.
  • Date and time
  • Resistance value, voltage value, and temperature
  • Comparator threshold value and judgement result
• Profile information: Profile information can be saved, loaded and deleted using a supported application (GENNECT Cross or GENNECT One).
  • Profile numbers: 1 to 100 (Data (2), (3), and (4) below are saved for each profile number)
  • Location: User-defined comment such as location of UPS
  • Device information: User-defined comment such as UPS management number
  • Battery number: 1 to 500 (start number, end number)

Measurement Navigator:

• Operation — Announces the next battery number to be measured via a screen display and audio guidance.
• Audio output is generated by a connected mobile device using the Z3210 and a supported application (GENNECT Cross).
• Preparations — Profile information registered with a supported application (GENNECT Cross or GENNECT One) must be transferred to the instrument.
• Communication interface — USB, Bluetooth® wireless communications (when Z3210 installed)
• Other functions: Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock

Power supply:

• LR6 (AA) Alkaline dry battery ×8,
• Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)

• Battery health monitoring — This device is crucial for ensuring the longevity and reliability of battery systems in critical applications, providing precise readings that help in preventive maintenance and troubleshooting.
• Quality control in manufacturing — The Hioki 3554-52 plays a pivotal role in manufacturing processes, where precise electrical measurements are essential for maintaining high-quality standards in products like electronics and power tools.
• Renewable energy systems — Ideal for use in renewable energy installations like solar panels and wind turbines, the device helps in monitoring system efficiency and diagnosing potential issues before they escalate.
• Electric vehicle maintenance — With the rise of electric vehicles, the Hioki 3554-52 has become an indispensable tool for service centres, ensuring that batteries operate optimally for safety and performance.
• Educational and research institutions — In academic settings, this device supports the study and development of new technologies by providing accurate measurements that contribute to innovative research in electrical engineering and materials science.

Rent the Hioki 3554-52 from Brandis Hire today

Elevate your project outcomes with Brandis Hire, Australia’s trusted equipment rental partner, offering unparalleled expertise and customer service. When you hire the Hioki 3554-52 from us, you’re choosing accuracy and reliability backed by a team dedicated to your success. Submit a booking request or reach out for more information.