FSM-70S Splicer & Cleaver Set

The Fujikura FSM70S single-fibre core alignment fusion splicer and CT30A cleaver boast typical splice losses of 0.02dB and 0.01dB on single and multimode fibre, respectively. Automated tension test, wind and heater cover, 7-second splice time and 14-second heat time.

Specifications

Model: 70S+ Fusion Splicer

Applicable Fibers: Single-mode (G.652 & G.657), Multimode (G.651.1), DS (G.653), CS (G.654), NZDS (G.655 & G.656) and Erbium-doped fiber

Cladding Diameter: 80 – 150 μm

Coating Diameter: 100 μm to 3,000 μm

Fiber Cleave Length: 5 to 16 mm

Typical Average Splice Loss: 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards

Splicing Time: ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fiber

Arc Calibration Method: Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available

Splicing Modes: 100 preset and user programmable modes

Splice Loss Estimate: Based upon dual camera core axis alignment data

Storage of Splice Result: Last 2,000 results stored in the internal memory

Fiber Display: X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation

Magnification: 320X for single X or Y view, or 200X for X and Y view Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor

Operating Condition: 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively

Mechanical Proof Test: 1.96 to 2.25N

Tube Heater: Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time: Typical 13 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves

Protection Sleeve Length: 60 mm, 40 mm, micro

Splice/Heat Cycles with Battery: Typical 200 cycles with power save functions activated Electrode Life 5,000 Arc Discharges

Power Supply: Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery

Terminals: USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03

Wind Protection: Maximum wind velocity of 15 m/s. (34 mph)

Dimensions: 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)

Weight: 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

• Core alignment technology for precise and low-loss splicing.
• Automated wind protector for faster operation.
• 9-second automated tube heater for quicker splicing cycles.
• Shock, dust and rain resistant, tested to withstand a 30-inch drop.
• Li-Ion battery that supports up to 200 splices per charge.
• Dual cameras with a high-resolution 4.7-inch LCD screen.
• 7-second splice time and 14-second heat shrink time.
• Programmable with 100 preset splicing modes.
• Onboard training videos for ease of use.
• Compact multi-function case with an integrated workstation.

• Telecommunications network installation and maintenance — The FSM-70S Splicer & Cleaver Set is widely used in telecommunications for installing and maintaining fibre optic networks. It ensures low-loss splicing for single-mode and multimode fibres, which is essential for high-speed data transmission in FTTX applications.
• Data centres and cloud computing infrastructure — Data centres rely on fibre optic networks to handle large volumes of data. The FSM-70S Splicer & Cleaver Set is a critical tool for splicing fibre optic cables efficiently, helping maintain high data transfer speeds, low latency and reliable network connectivity within cloud computing and data centre infrastructures.
• Military and aerospace communications — The rugged design of the FSM-70S Fusion Splicer makes it ideal for military and aerospace applications. It is used to ensure secure, reliable fibre optic connections in challenging environments, such as combat zones or aircraft systems, where durability and precision are paramount.
• Utilities and energy sector — In the utility sector, the FSM-70S Fusion Splicer is employed for fibre optic communication systems in power grids and energy management. It ensures reliable splicing in remote and harsh conditions.

Enquire about the FSM-70S Splicer & Cleaver Set for rent

At Brandis Hire, our commitment to quality and reliability shines through every rental, especially with top-tier products like the FSM-70S. Thanks to our expansive range of specialised tools and outstanding customer service, we’ve become one of Australia’s leading equipment rental providers. 

Submit a booking request for the FSM-70S Splicer & Cleaver Set for rent today or contact us for more details.